Description
Underwater Magic is a highly durable and versatile underwater glue and sealant that is completely odorless and free of harmful chemicals such as oxime, acetic acid, iso-cyanate, and solvents.
It contains no silicone and is resistant to a wide range of substances, including chlorine, saltwater, weathering, UV light, aliphatic solvents, oils, grease, diluted inorganic acids, and alkali.
Additionally, it is permanently elastic with good abrasion resistance and mechanical properties. It is temperature resistant from -40°C/-40°F to +90°C/+194°F and can withstand temperatures up to +200°C/+392°F for a short time (2 to 3 hours).
Underwater Magic is also safe for use in areas near food.”
Application:
- Indoor and outdoor swimming pool in full water contact
- Fixing and replacement of tiles; filling new joints
- Fixing or new joints at the edge of the pool
- Piping and building armatures
- In the insulation technology
- Repair in and around wet areas
- Maintenance in and around wet areas
- Repair of fish tanks & ponds*…etc.
Works at ground level water intakes, skimmers, lighting, overflow-channels, to stone transition areas, concrete and wood
- Plastics • Styrofoam • Metals • Wood
- Glass and glass tiles & mosaic
- Ceramic and ceramic tiles and mosaic
- Stone, Granite, Concrete …
Can be bonded to each other!!!
Excellent adhesion on most surfaces without a primer*
*Nevertheless, the responsibility of assessing the product’s suitability for a specific application rests with the consumer.
Available colors:
LIGHT GREY
Available packaging:
Underwater Magic comes in a standard tube with a filling of 600 ml (approx. 20.29 US fl.oz.)
Made in Germany for Profi-Glue Limited . www.underwatermagic.eu
Underwater Magic is a Trademark of Profi-Glue Limited Cyprus.www.profi-glue.com
Important notes:
Please note that proper cleaning and preparation are crucial when using Underwater Magic.
For optimal bonding, it is necessary that all surfaces are firm, clean, and free of any substances that may interfere with adhesion such as grease, silicone, algae, sun cream residues, old adhesive, or other contaminants.
Before application, it is important to ensure that your water is properly balanced, including safe levels of Chlorine/Bromine, appropriate pH, Calcium, and other necessary parameters. Additionally, the water temperature should be between +5°C and +40°C (41°F and 104°F) for optimal results.
To ensure proper curing, it is important to avoid shock treatments for the first 5 to 7 days after application.
Maintaining proper water balance is essential to prevent damage to your armatures and to ensure the safety of swimmers.
