Description
Underwater Magic ™ MOSAIC for underwater mosaic tile repairs – is a ready-to-use adhesive made for fixing mosaic tiles in and around swimming pools. It works even underwater and holds strong in fresh, salt, and chlorinated water.
This adhesive is free from strong smells, acids, isocyanates, solvents, and silicone. It also resists, to an extent, damage from chlorine, salt water, sunlight, and weather.
Supplied in a compact 60 ml squeeze tube for small mosaic repairs. – no need to drain your pool or remove chemicals.
Application:
- For indoor and outdoor pools, even when fully filled with water
- Mosaic tile repair and replacement – underwater mosaic tile repairs
- Joint repairs at pool edges
- Maintenance and repairs in and around wet areas
Underwater Magic ™ MOSAIC works at ground level water intakes, lighting, overflow-channels, to stone transition areas, concrete and wood
• Mosaic • Glass tiles & Glass
• Ceramic • Ceramic tiles • Mosaic
• Gunite™ • PVC-Liner • Fiber-glass
• Various Plastics • Metals • Wood • Enamel
• Stone (not porous) • Granite • Concrete
• Copper • Zinc • Aluminum • Stainless steel…
Can be bonded with and to each other
Excellent adhesion on most surfaces without a primer*
* However, it is left to the consumer himself to check the product’s suitability for the application in question.
Preparation is essential, all surfaces need to be solid, clean, free of grease, silicone, algae, residuals of sun cream, old adhesive and anything which could interfere with the bonding, your water need to be in balance (Chlorine / Bromine level in safe swimming pool levels, Ph, Calcium etc.) and the water temperature during application needs to be between +5°C and maximum 40°C( 41°F and max 104°F), a shock treatment shall be avoided during curing 5 to 7 days after application.
You should keep your water in balance at all times since unbalanced water can not only be harmful to humans it also can destroy your armatures.
Usage FAQ:
Underwater Magic ™ MOSAIC is a “one time use” product. The product will begin curing after opening.
- What is the approved opening procedure and recommended nozzle cut position for the 60 ml tube?
45 degrees cut angle, at the point giving the right opening size. - What dispensing resistance should be expected from a correctly stored, in-date tube?
Since the product is pasty, you need to use some force to get it out, depending on the size of the opening
Features:
- Strong adhesion to most surfaces
- Resistant to weather and UV light
- Salt and chlorine water resistant
- For direct underwater use
- Temperature resistant from -40°C to +100°C; instantly rainproof
- Elongation at break (DIN 53504) = 300%
Colors: white
Packaging: squeeze tube with a filling of 60 ml
Produced in EU for Profi-Glue Limited . www.underwatermagic.eu
Underwater Magic ™ MOSAIC is a Trademark of Profi-Glue Limited. www.profi-glue.com
** Click for Technical support request
